User Manual
Table Of Contents
- Contents
- 1. Hardware
- 2. Install and Access the Switch in Your Network
- 3. Optimize the Switch Performance
- 4. Use VLANS for Traffic Segmentation
- 5. Manage the Switch in Your Network
- 6. Maintain and Monitor the Switch
- Update the firmware on the switch
- Manage the configuration file
- Return the switch to its factory default settings
- Control access to the device UI
- HTTP and HTTPS management access
- Change or lift access restrictions to the switch
- Manage the DoS prevention mode
- Manage the power saving mode
- Control the port LEDs
- Change the switch device name
- View system information
- Date and time settings
- View switch connections
- View the status of a port
- Power over Ethernet
- 7. Diagnostics and Troubleshooting
- 8. Factory Default Settings and Technical Specifications
- A. Additional Switch Discovery and Access Information
2
Install and Access the Switch in Your
Network
This chapter describes how you can install the switch in your network, get an IP address
for the switch, and use the IP address to access the switch's device UI so you can set up,
manage, and monitor the switch.
The chapter contains the following sections:
• Set up the switch in your network and power on the switch
• Discover the switch's IP address to access its device UI
• Change the language of the device UI
• Change the switch password
• Register the switch
14