User Manual
Table Of Contents
- Contents
- 1. Hardware
- 2. Install and Access the Switch in Your Network
- 3. Optimize the Switch Performance
- 4. Use VLANS for Traffic Segmentation
- 5. Manage the Switch in Your Network
- 6. Maintain and Monitor the Switch
- Update the firmware on the switch
- Manage the configuration file
- Return the switch to its factory default settings
- Control access to the device UI
- HTTP and HTTPS management access
- Change or lift access restrictions to the switch
- Manage the DoS prevention mode
- Manage the power saving mode
- Control the port LEDs
- Change the switch device name
- View system information
- Date and time settings
- View switch connections
- View the status of a port
- Power over Ethernet
- 7. Diagnostics and Troubleshooting
- 8. Factory Default Settings and Technical Specifications
- A. Additional Switch Discovery and Access Information
Technical specifications
This section describes the technical specifications for the switch model.
Model MS108EUP technical specifications
The following table shows the technical specifications for model MS108EUP.
Table 6. Model MS108EUP technical specifications
DescriptionFeature
Ethernet RJ-45 copper ports (100M/1G/2.5G)Network interface
Category 5e (Cat 5e) or higher-rated Ethernet cableNetwork cable
Ports 1-4: Ultra60 PoE++ (802.3bt). Each port can deliver power up to 60W
PoE++.
Ports 5-8: PoE+ (802.3at). Each port can deliver power up to 30W PoE+.
PoE ports
54V, 4.7A DC inputPower input
270.5Power consumption
230WTotal PoE power budget
8.3 x 5.5 x 1.6 in (210 x 140 x 40 mm)Dimensions (W x D x H)
1.98 lb (0.9 kg)Weight
32º to 104ºF (0° to 40°C)Operating temperature
10–90% maximum relative humidity, noncondensingOperating humidity
-4° to 158°F (-20° to 70°C)Storage temperature
5-95% relative humidity, noncondensingStorage humidity
EMC Class B device, FCC part 15 Class B, ISED, CE Class B, RCM Class B, VCCI
Class B, BCMI, CCC, KC Class B
Electromagnetic
compliance
BC, CE LVD, CSA, BSMI, CCCSafety certifications
User Manual110Factory Default Settings and
Technical Specifications
8-port Ultra60 PoE++ Multi-Gigabit (2.5G) Ethernet Plus Switch