User Manual
Table Of Contents
- Contents
- 1. Get Started
- 2. Connect to the Mobile Hotspot
- 3. Manage Battery Usage and Charging
- 4. Manage Your Internet Connection
- 5. Control Internet Access
- 6. Specify Mobile Hotspot Network Settings
- 7. Manage Your Mobile Hotspot Network
- View the Network Information
- View Mobile Hotspot Network Status
- View WiFi Details
- View a Network Map
- View Connected Devices
- Update the Mobile Hotspot Firmware
- Change the admin Password
- Manage SMS Messages
- Back Up and Restore the Mobile Router Settings
- Factory Reset
- Reboot the Mobile Hotspot
- Power Off the Mobile Hotspot
- View Details About Your Mobile Router
- 8. Frequently Asked Questions
- Why can’t my device connect to the mobile hotspot?
- Why can’t I access the Internet?
- Why is the signal indicator always low?
- Why is the download or upload speed slow?
- What do I do if I forget my admin login password?
- How do I disconnect from the mobile broadband network?
- The LCD is not lit. How do I know if the mobile hotspot is still powered on?
- How do I find my computer’s IP address?
- How do I find a device’s MAC address?
- Where can I find more information?
- 9. Troubleshooting
- A. Specifications
4. Select SETTINGS > Advanced Settings > Cellular.
The Network Settings page displays.
5. Clear the Data check box.
6. Click the Apply button.
Your settings are saved.
The LCD is not lit. How do I know if the
mobile hotspot is still powered on?
The LCD dims to save energy. The LED continues to blink slowly to indicate that the
mobile hotspot is still powered on. To wake the LCD, tap the Power button.
How do I find my computer’s IP address?
The steps for finding your computer’s IP address depend on the operating system. If
your device runs an operating system not listed here, see the appropriate operating
system documentation.
How do I find my computer’s IP address on a Windows 7,
Windows 10, or Windows Vista device?
To find the IP address on a Windows 7, Windows 10, or Windows Vista device:
1. Open the command prompt window:
a. Select Start > Run.
b. Enter cmd or command and click the OK button.
2.
At the command prompt, enter ipconfig and press Enter.
3.
Write down the IP address for the entry that relates to the wireless network
connection.
The IP address might be listed under IPv4 Address or something similar.
User Manual80Frequently Asked Questions
Nighthawk 5G Mobile Hotspot Pro