User Manual
Table Of Contents
- Contents
- 1. Get Started
- 2. Connect to the Mobile Hotspot
- 3. Manage Battery Usage and Charging
- 4. Manage Your Internet Connection
- 5. Control Internet Access
- 6. Specify Mobile Hotspot Network Settings
- 7. Manage Your Mobile Hotspot Network
- View the Network Information
- View Mobile Hotspot Network Status
- View WiFi Details
- View a Network Map
- View Connected Devices
- Update the Mobile Hotspot Firmware
- Change the admin Password
- Manage SMS Messages
- Back Up and Restore the Mobile Router Settings
- Factory Reset
- Reboot the Mobile Hotspot
- Power Off the Mobile Hotspot
- View Details About Your Mobile Router
- 8. Frequently Asked Questions
- Why can’t my device connect to the mobile hotspot?
- Why can’t I access the Internet?
- Why is the signal indicator always low?
- Why is the download or upload speed slow?
- What do I do if I forget my admin login password?
- How do I disconnect from the mobile broadband network?
- The LCD is not lit. How do I know if the mobile hotspot is still powered on?
- How do I find my computer’s IP address?
- How do I find a device’s MAC address?
- Where can I find more information?
- 9. Troubleshooting
- A. Specifications
Set Up Guest Wi-Fi
You can set up Guest Wi-Fi for your device. Guest Wi-Fi allows you to share your Wi-Fi
with temporary visitors without exposing them to your devices on Main Wi-Fi.
Note: To set up Guest Wi-Fi:
1. From the Web UI, select Guest Network.
The Guest Network page appears.
2. Check the GUEST NETWORK check box.
3.
Specify the password to access Guest Wi-Fi.
The password can be from 8 to 63 characters in length.
4.
If you want to lock the Guest Wi-Fi password so that it cannot be edited, check the
Generate Passphrase check box.
5. In the Encryption Type menu , select a security option:
•
WPA2 Personal AES. Strong security supported by newer Wi-Fi devices, the
default.
•
WPA/WPA2. Strong security supported by most Wi-Fi devices. Use WPA2
Personal AES whenever possible.
•
None. Anyone can access your Wi-Fi network without a password and you are
responsible for charges incurred. Best practice is not to select this option.
6.
Use the Broadcast WiFi Name switch to enable the broadcast network for Guest
Wi-Fi.
By default, Broadcast Network Name is enabled. If you need to disable it, toggle the
switch to off. If you set Broadcast Network Name to off, you are prompted to save
or cancel the Broadcast Network Name. If you choose Save, the device restarts Wi-Fi
connections, and any currently devices temporarily lose their connection.
User Manual54Specify Mobile Hotspot Network
Settings
Nighthawk 5G Mobile Hotspot Pro