Operation Manual

Figure 7. Tethered access is not supported during Ethernet offloading
Enable Data Offloading From the NETGEAR Mobile App
To enable data offloading from the NETGEAR mobile app:
1. Launch the NETGEAR Mobile app on your smartphone.
2. Swipe down.
The dashboard displays.
3.
Tap Offloading.
The Offloading page displays.
4. Select WiFi.
The Offloading page displays a list of WiFi networks in your area.
5. To connect to a network on the list, do the following:
a. Tap a WiFi network.
b. When prompted, enter the password for the WiFi network and tap CONNECT.
6. To join another WiFi network that is not in the list, do the following:
a. Tap Join Network.
b. When prompted, type the network name and the password.
c. Tap CONNECT.
7. To offload to a preferred network, do the following:
a. Tap Preferred Networks.
A list of preferred networks displays.
b. Select the network and enter the password.
c. Tap CONNECT.
When the hotspot is offloading the Internet connection, the WiFi icon displays the signal strength. The
screen displays the SSID of the active WiFi network.
Manage Your Internet Connection
33
Nighthawk M1 4GX Gigabit LTE Mobile Router Model MR1100