Owner's Manual
Table Of Contents
- User Manual
- Contents
- 1. Overview
- 2. Connect to the Network and Access the Router
- 3. Specify Your Internet Settings
- Use the Internet Setup Wizard
- Manually set up the Internet connection
- Specify IPv6 Internet connections
- Requirements for entering IPv6 addresses
- Use auto detect for an IPv6 Internet connection
- Set up an IPv6 6to4 tunnel Internet connection
- Set up an IPv6 pass-through Internet connection
- Set up an IPv6 fixed Internet connection
- Set up an IPv6 DHCP Internet connection
- Set up an IPv6 PPPoE Internet connection
- Use auto config for an IPv6 Internet connection
- Set up an IPv6 6rd Internet connection
- Manage the MTU size
- 4. Control Access to the Internet
- Activate and manage NETGEAR Armor using the Nighthawk app
- Enable access control to allow or block access to the Internet
- Manage network access control lists
- Use keywords to block Internet sites
- Block services from the Internet
- Delete keywords from the blocked list
- Prevent blocking on a trusted computer
- Schedule when to block Internet sites and services
- Set up security event email notifications
- 5. Optimize Performance
- 6. Manage Network Settings
- View or change the WAN settings
- Set up a default DMZ server
- Change the Router’s Device Name
- Change the LAN TCP/IP settings
- Specify the IP addresses that the router assigns
- Disable the DHCP server feature in the router
- Manage reserved LAN IP addresses
- Use the WPS wizard for WiFi connections
- Change the WiFi password or the WiFi security
- Set up the router as a WiFi access point
- Set up a bridge for a port group or VLAN tag group
- Manage custom static routes
- Enable or disable implicit beamforming
- 7. Manage your network
- Update the router and satellite firmware
- Change the admin password
- Enable admin password reset
- Reset the admin password
- View information about the router and the Internet and WiFi settings
- Display the statistics of the Internet port
- Check the Internet connection status
- View and manage logs of router activity
- View devices currently on the network
- Monitor Internet traffic
- Manage the router configuration file
- Manage remote access
- Connect to your router with Anywhere Access
- Return the router or satellite to its factory default settings
- 8. Manage Port Forwarding and Port Triggering
- 9. Use VPN to Access Your Network
- 10. Troubleshooting
- 11. Supplemental Information
- Quick Start
- Product Info
Data Sheet | MK63 S
Nighthawk
®
Mesh WiFi 6 System
PAGE 7 of 7
NETGEAR, Inc. 350 E. Plumeria Drive, San Jose, CA 95134-1911 USA, www.NETGEAR.com/support D-MK63S-0
This product comes with a limited warranty that is valid only if purchased from a NETGEAR authorized reseller.
*
90-day complimentary technical support following purchase from a NETGEAR authorized reseller.
†
Maximum wireless signal rate derived from IEEE 802.11 specications. Ac tual data throughput and wireless coverage will var y and may be lowered by net work and environmental
conditions, including network trafc volume and building construction. NETGEAR makes no representations or warranties about this product's compatibility with future
standards.
‡
As compared to an AC1200 2x2 router.
1
Requires compatible AX clients with DL-OFDMA and UL-OFDMA support.
**
NETGEAR Armor requires a paid subscription after the initial introductory period.
NETGEAR, NIGHTHAWK, and the NETGEAR Logo are trademarks of NETGEAR, Inc. Wi-Fi EasyMesh is a trademark of Wi-Fi Alliance. Any other trademarks mentioned herein
are for reference purposes only. © 2021 NETGEAR, Inc.