User Guide

Supplemental Information

Mobile LTE Broadband 11n Wireless Router MBR1516

Factory Default Settings

Use the Restore Factory Settings button located on the bottom of your router to reset all

settings to their original factory default settings. This is called a hard reset. To perform a hard

reset, press and hold the Restore Factory Settings button for 6 seconds. Your router

returnx to the factory configuration settings that are shown in the following table.

Feature Default Behavior

Router

User login URL http://192.168.0.1

User name (case-sensitive) admin

Internet

connection

WAN MAC address Use default address

WAN MTU size 1500

Port speed AutoSense

Local

network

(LAN)

LAN IP www.routerlogin.net

Subnet mask 255.255.255.0

RIP direction None

RIP version Disabled

RIP authentication None

DHCP server Enabled

DHCP starting IP address 192.168.0.2

DHCP ending IP address 192.168.0.254

DMZ Disabled

Time zone PST for North America

Daylight saving time adjustment Enabled

Firewall Inbound communication from the

Internet

Disabled (except traffic on port 80, the HTTP port)

Outbound communication to the

Internet)

Enabled (all)

Source MAC filtering Disabled