User Guide

Hardware Setup
9
Mobile LTE Broadband 11n Wireless Router MBR1516
Table 1 describes each LED and button located on the front panel of the router.
Table 1. LED descriptions
LED Activity Description
WPS Press the WPS button to open a 2-minute window for the router to connect with other
WPS-enabled devices. For more information about this function, see Wi-Fi Protected Setup
(WPS) Method on page 20.
WiFi On/Off This button can be used to control the WiFi radio or both the WiFi radio and mobile broadband
radio. Use the router interface to select the options. The default is set for WiFi radio only.
Power Solid green The router is turned on and operating normally.
Solid amber POST (power-on self-test) is in progress.
Off Power is not supplied to the router.
Internet Port Solid green There is an Internet session.
Solid amber Traffic meter limit has been reached; traffic is blocked.
Blinking green Data is being transmitted over the Internet connection.
Blinking amber Traffic meter limit has been reached, but traffic is not blocked.
Blinking green and amber Failover from Ethernet WAN to mobile broadband.
Off No Internet connection is detected.
WiFi Solid blue The WiFi local port is initialized.
Blinking blue Data is being transmitted or received over the WiFi link.
Off The wireless access point is turned off.
LAN Ports Solid green The local Ethernet ports have detected wired links with computers.
Blinking Data is being transmitted or received.
Off No link is detected on these ports.
WAN Port Solid green The Ethernet WAN port has detected an active link.
Blinking Data is being transmitted or received.
Off No link is detected on these ports.
SMS Solid green SMS messages are waiting.
Off There are no unread SMS messages.