User Guide

Managing Your Network
61
NETGEAR Mobile Broadband 11n Wireless Router MBR1310
View Attached Devices
The Attached Devices screen shows all IP devices that the router discovered on the local
network. From the main menu under Maintenance, select Attached Devices:
For each device, the table shows the IP address, device name if available, and the Ethernet
MAC address. If the router is rebooted, this data is lost until the router rediscovers the
devices. To force the router to look for attached devices, click the Refresh button.
Back Up, Restore, or Erase Your Settings
The configuration settings of the router are stored in a configuration file in the router. This file
can be backed up to your computer, restored, or reverted to factory default settings. The
procedures in the following sections explain how to do these tasks.
Back Up the Configuration to a File
 To back up the configuration to a file:
1. L
og in to the router. Type http://www.routerlogin.net in the address field of your
Internet browser. Enter admin for the user name and your password (or the default,
password
).
Connection Status Connection Time The time elapsed since the last connection to the Internet
through the broadband port.
Connecting to Server The connection status.
Negotiation Success or Failed.
Authentication Success or Failed.
Getting IP Address The IP address assigned to the WAN port by the ADSL
Internet service provider.
Getting Network Mask The network mask assigned to the WAN port by the ADSL
Internet service provider.
Field Description