User Guide

Managing Your Network
59
NETGEAR Mobile Broadband 11n Wireless Router MBR1310
Show Statistics
Click the Show Statistics button on the Router Status screen to display router usage
statistics:
The following table explains the statistic fields.
Wireless Port
(See Manually
Configure Your
Wireless Settings on
page 26.
Name (SSID) The service set ID, also known as the wireless network name.
Region The country where the unit is set up for use.
Channel The current channel, which determines the operating frequency.
Mode The current mode, which determines the maximum data speed.
Wireless AP Indicates if the access
point feature is disabled or not. If not
enabled, the Wireless LED on the front panel is off.
Broadcast Name Indicates if the router is configured to broadcast its SSID.
Wireless Isolation Indicates whether wireless isolation is enabled or disabled.
Wi-Fi Protected
Setup
Indicates status of the Wi-Fi Protected Setup.
Field Description
Status The link status. Note that LAN2, LAN3, and LAN4 are guest networks.
TxPkts The number of packets transmitted on this port since reset or manual clear.
RxPkts The number of packets received on this port since reset or manual clear.
Collisions The number of collisions on this port since reset or manual clear.
Tx B/s The average egress line utilization for this port.
Rx B/s The average ingress line utilization for this port.
Up Time The time elapsed since the last power cycle or reset.
Field Description