User Guide

Connecting to the Internet

NETGEAR Mobile Broadband 11n Wireless Router MBR1310

Manually Configure Your Internet Settings

For you to connect to the network, an active broadband service account is required. Contact

your ISP for your user name, password, and the network name. You have to also configure

some or all of the settings described in the following sections, depending on how you have

chosen to connect to the Internet:

• Broadband Settings on page 15

•

Mobile Broadband Settings on p

age 16 (not required if using Ethernet connection only)

• Ethernet Broadband Settings on page 18 (not

required if using mobile broadband

connection only)

Broadband Settings

 To manually configure your broadband Internet settings:

1. Log in to the router as described in Log In to

Your Router on page 12.

2. From the main menu, select Broadband

Settings.

3. Adjust the settings as needed based on your Internet connection. The fields in this screen

are described in the following table.

Fields and Check Boxes Description

Internet Connection Mode The choices are:

• Use Ethernet first and if fail use mo

bile broadband connection

• Always use mobile broadband connection

• Always use Ethernet connection

Failover Detection Method

Select the failover method and enter the related information:

• DNS lookup using WAN DNS Server

• Perform a DNS lookup by a hostname

• Ping this IP address

Retry Interval is

Enter the retry interval.