User Guide

Chapter 1. Connecting to the Internet | 15
Mobile Broadband 11n Wireless Router MBR1210 User Manual
3. Adjust the settings as needed based on your Internet connection. The fields in this screen
are described in Table 2.
4. The following buttons are available:
• Apply. Apply the changes that you made.
• Cancel. Discard changes.
Table 2. Internet Connection Settings
Fields and Check Boxes Description
Internet Connection Mode The choices are:
• Always use an Ethernet connection (default)
• Use Ethernet first and if it fails use mobile broadband connection
• Always use mobile broadband connection
Failover Detection Method
1
1 This field is available only when the Internet Connection Mode is Use Ethernet first and if fail use 3G mobile
connection.
Select the failover method and enter the related information:
• DNS lookup using WAN DNS Server
• Perform a DNS lookup by a hostname
• Ping this IP address
Retry Interval is
1
Enter the retry interval.
Failover after
1
Enter how many retry attempts to make before failing over.
Resume after
1
Enter how long to wait for primary link is stabilized before resuming to
use the primary link.
Enable Hardware link detection Enter when to failover when the Ethernet link is dropped. This is
independent of the DNS / Ping detection methods.