Reference Manual

Reference Guide for the Model MA401 802.11b Wireless PC Card
Installing the MA401 802.11b Wireless PC Card 2-21
Install the MA401 driver and
configuration utility
software, continued.
f. The Resources and
Properties window opens.
Refer to the Wireless
parameter configuration
chapter and modify any
entry if necessary. Click on
OK.
g. The system returns back to
the Network window. Click
on Close.
h. If TCP/IP is enabled, the
system will prompt you for
an IP address or use DHCP.
Answer accordingly.
i. When prompted, click Yes
to reboot the system.
You should now see the
Windows system tray icon
on the right in the lower
right portion of the
Windows task bar.
Note: The I/O Address
and IRQ settings should
be unique and not conflict
with any other device
settings in you system. If
there is a system resource
conflict, please check
Windows NT Diagnostics
and find a free I/O
address and IRQ.
MA401 LAN Configuration Utility
System Tray Icon
MA401.book Page 21 Tuesday, October 8, 2002 4:08 PM