User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Configure Switching Information User Manual187
9. Select from the list to configure the Native VLAN ID.
This is the native VLAN for the port, and is valid only when the port switchport mode is
T
runk.
10. Configure the Trunk Allowed VLANs.
This is the set of VLANs of which the port can be a member when configured in T
runk
mode. By default, this list contains all possible VLANs, even if they are not yet created.
VLAN IDs are in the range 1 to 4093. Use a hyphen (-) to specify a range, or a comma (,)
to separate VLAN IDs in a list. Spaces are not permitted. A zero value clears the allowed
VLANs. An All value sets all VLANs in the range (1 to 4093).
11. Click the Apply button.
Your settings are saved.
The Native VLAN Tagging field displays enabled or disabled:
• When VLAN tagging is enabled, if the trunk port receives untagged frames, it forwards
them on the native VLAN with no VLAN tag.
• When VLAN tagging is disabled, if the trunk port receives untagged frames, it includes
the native VLAN ID in the VLAN tag when forwarding
Configure VLAN Membership
To configure VLAN membership:
1. Launch a web browser
.
2. In the address field of your web browser
, enter the IP address of the switch.
The login window opens.
3. Enter admin as the user name, enter your local device password,
and click the Login
button.
The first time that you log in, no password is required. However, you then must specify a
local device password to use each subsequent time that you log in.
The System Information page displays.
4. Select Switching> VLAN >
Advanced > VLAN Membership.