User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Configure Switching Information User Manual216
The following table describes the nonconfigurable fields.
Configure Advanced STP Settings
To configure advanced STP settings:
1. Launch a web browser
.
2. In the address field of your web browser
, enter the IP address of the switch.
The login window opens.
3. Enter admin as the user name, enter your local device password,
and click the Login
button.
The first time that you log in, no password is required. However, you then must specify a
local device password to use each subsequent time that you log in.
The System Information page displays.
4. Select Switching > STP >
Advanced > STP Configuration.
Table 74. STP Configuration
Field Description
Configuration Digest Key Identifier used to identify the configuration currently being used.
Configuration Format Selector The version of the configuration format being used in the exchange of
BPDUs.
MST ID Table consisting of the MST instances (including the CST) and the
corresponding VLAN IDs associated with each of them.
VID ID Table consisting of the VLAN IDs and the corresponding FID
associated with each of them.
FID ID Table consisting of the FIDs and the corresponding VLAN IDs
associated with each of them.