Data Sheet

ManualsBrandsNETGEAR ManualsComputers & Accessories8xMulti-Gig PoE+ (240W) and 2xSFP+ (shared) Managed Switch

Features highlights

8-port Multi-Gigabit switch with full PoE+ provision on all ports

NBASE-T (basis for the upcoming IEEE 802.3bz stan-

dard) enables 2.5X to 5X faster speeds up to 100m on

legacy Cat5e/Cat6 cables

• 8-port PoE+ Multi-Gigabit Ethernet 1G/2.5G BASE-T with 8 x 30W = 240 Watts full power

• Including two of these ports with 5G BASE-T capability

• Zero cost cabling plant investment required

• Full 1000BASE-T backward compatibility

• 2-port 10G SFP+ uplinks for 8x2.5G to the Wave 2 11ac Access Points and 2x10G line-rate aggregation

to the wiring closet

• Non blocking 90Gbps fabric for (6 x 2.5G) + (2 x 5G) + (2 x 10G) full duplex operation

L2, L3 and L4 switching features (access control list, classiﬁcation, ﬁltering, IPv4/IPv6 static routing, IPv4 dynamic routing) are performed in hardware at interface

line rate for voice, video, and data convergence

Example of redundant, wire speed 8x2.5G 2x10G wireless access layer topology:

Unrivalled ﬂexibility

Easy Mount allows for standard rack mounting as well as plenum mounting on rectangular and round poles, or walls

Secure placement above drop-down ceilings, in air passageways and where other switches will not go, vertical or horizontal, ﬂat or perpendicular

Ships with four self-adhesive rubber footpads for installation on a ﬂat surface (cushion against shock and vibrations; ventilation space between stacked switches)

For walls and poles, the switch ships with a mount to which you can click-attach the back or the bottom of the switch (ﬂat or perpendicular)

The mount provides a locking tab and the switch comes with a power cord locker for additional peace of mind in nontraditional networking environments

Whisper quiet 28.9dB acoustics when operating at 25°C (77°F), well below normal oces ambient background noise

LACP

Standard Rack Mounting

Attaching the Switch to a Wall Attaching the Switch to a Round Pole

Attaching the Switch to a Rectangular Pole

M4200 Distributed Distribution Layer Switches

Stack of two M4300 10G Switches,

or M6100 chassis equipped with two 10G blades

10G uplinks (Fiber)

2.5G PoE+ (Copper)

Wave 2 11ac

Wireless Access Points

ProSAFE® Intelligent Edge Managed Switches Data Sheet

M4200 series

Page 4 of 31