Brochure

ManualsBrandsNETGEAR ManualsComputers & Accessories8xMulti-Gig PoE+ (240W) and 2xSFP+ (shared) Managed Switch

ProSAFE

M4200 Intelligent Edge Series

Multigigabit Ethernet for Wave 2 11ac

M4200 Series

The ProSAFE® M4200-10MG-PoE+ Managed Switch was designed from the ground up to optimize the installation of Wave 2 11ac

access points. Includes eight full power PoE+ and multi-speed 1G, 2.5G ports for 100 meter cable runs, combined with two 10G uplinks

for a fully non-blocking deployment of eight Wave 2 11ac access points from any vendor. Plenum rated, slim design and mounting

accessories allow for access point placement optimization and cabling eciency even outside the rack.

Summary of content (7 pages)

PAGE 1
ProSAFE® M4200 Intelligent Edge Series Multigigabit Ethernet for Wave 2 11ac M4200 Series The ProSAFE® M4200-10MG-PoE+ Managed Switch was designed from the ground up to optimize the installation of Wave 2 11ac access points. Includes eight full power PoE+ and multi-speed 1G, 2.5G ports for 100 meter cable runs, combined with two 10G uplinks for a fully non-blocking deployment of eight Wave 2 11ac access points from any vendor.
PAGE 2
Wave 2 11ac Access Point deployment M4200 is the world’s first Multigigabit Ethernet switch with eight full power PoE+ and multi-speed 1G, 2.5G ports combined with two 10G uplinks for a fully non-blocking deployment of eight Wave 2 11ac access points from any vendor. Building 1: Wireless Access Layer • With Wave 2 802.
PAGE 3
How to deploy Wave 2 11ac Access Points Key positioning attributes of the ProSAFE® M4200-10MG-PoE+ • Provide eight full power PoE+ and multi-speed 1G, 2.5G ports combined with two 10G SFP+ uplinks • Allow for a fully non-blocking deployment of eight Wave 2 11ac access points, with 240W PoE budget • 8x2.5G to the access points and 2x10G line-rate aggregation to the wiring closet • Deliver 240W full Power over Ethernet (PoE+) across 8 ports • Two of these multi-speed 1G, 2.
PAGE 4
M4200 Series Features The ProSAFE® M4200-10MG-PoE+ Managed Switch was designed from the ground up to optimize the installation of Wave 2 11ac access points. Includes eight full power PoE+ and multi-speed 1G, 2.5G ports for 100 meter cable runs, combined with two 10G uplinks for a fully non-blocking deployment of eight Wave 2 11ac access points. NETGEAR Multigigabit Ethernet is compatible with most major wireless and switching vendors managed solutions, and the only one with 8x2.
PAGE 5
Hardware at a Glance FRONT Model name M4200-10MG-PoE+ Switching Fabric Form-Factor Full width 1-unit 1U rack mount 3.9 in (10 cm) deep 100/1000/2.5G BASE-T RJ45 ports 100/1000/2.5G/5G BASE-T RJ45 ports 6 ports PoE+ 100M; 1G; 2.5G 2 ports PoE+ 100M; 1G; 2.5G; 5G 90 Gbps 1000/10GBASE-X SFP+ ports PSU 2 ports 1G; 10G Internal 240W PoE budget 8-port Multigigabit and PoE+ full provisioning SIDE MANAGEMENT Fans Out-of-band Console Fixed Side-to-side 28.
PAGE 6
Accessories GBIC SFP and SFP+ Optics for M4200 series Multimode Fiber (MMF) Ordering information • Worldwide: see table below OM1 or OM2 62.5/125µm • Warranty: 5 years 10 Gigabit SFP+ Single mode Fiber (SMF) OM3 or OM4 50/125µm AXM763 AXM763 AXM762 10GBase-LRM long reach multimode 802.3aq - LC duplex connector 10GBase-LRM long reach multimode 802.3aq - LC duplex connector 10GBase-LR long reach single mode LC duplex connector up to 220m (722 ft) up to 260m (853 ft) up to 10km (6.
PAGE 7
Components M4200-10MG-PoE+ Multigigabit Ethernet Managed Switch • 8-port PoE+ 1G / 2.5G (RJ45) including 2-port with 5Gbps Ordering information • Americas, Europe: GSM4210P-100NES • Non blocking 90Gbps fabric for (6 x 2.