Nighthawk 4GX Gigabit LTE Mobile Router User Manual

Control Internet Access
37
Nighthawk M1 4GX Gigabit LTE Mobile Router
Access Control
You can use access control to set up a list of devices to be blocked from accessing the
mobile router or to be allowed access.
Set Up Access Control From the NETGEAR Mobile App
 To set up access control:
1. On your smartphone, connect to the mobile router
’s WiFi network.
2. Launch the NETGEAR Mobile app.
3. Swipe down.
The dashboard displays.
4. T
ap Devices.
The Devices page displays.
5. T
ap Block List or Allow List.
Depending on your selection, the page displays an Allow List or a Block List.
6. T
o turn blocking on or off, tap the Block all in list slider.
7. T
o turn an allow list on or off, tap the Allow only in list slider.
8. T
o add a device to the list, tap + and select the device.
The device is added to the list.
9. T
o remove a device from the list, select the device and then tap the trash can.
The device is removed from the list.
Set Up Access Control From a Web Browser
 To set up access control:
1. From a computer that is connected to your network, launch a web browser
.
2. Enter http://m.home or http://192.168.1.1.
A login page displays.
3. Enter the administrator login password.
The password is case-sensitive.
The dashboard displays.
4. Select Settings > Security >
Access Control.
The Access Control page displays.
5. Select the Enable check box.