Owner's Manual

Advanced Settings
73
N300 Wireless Router JWNR2000v3
Control Wireless Interference
By default, the 20/40 MHZ Coexistence is enabled so that your wireless network does not
interfere with other wireless networks in your area. This setting might reduce the maximum
speed of your 2.4 GHz wireless network to half when another wireless network is detected in
your environment.
 To turn the 20/40 MHZ Coexistence on or off:
1. Select ADV
ANCED > Advanced Setup > Advanced Wireless Settings.
The following screen displays:
By default, the Enable 20/40 MHZ Coexistence check box is selected.
2. Select or clear the Enable 20/40 MHZ Coexistence check box.
If you clear this check box, you can maintain maximum speed for your wireless network
regardless of other networks in your area.
3. Click Apply.
Your changes take effect.
Control Power Transmission
Transmission power control limits the maximum power used when the router transmits
packets. The options are 100%, 75%, 50%, and 25%. You can easily turn down the
transmission power to ensure that you are utilizing the optimum power that gives you the
optimum range while saving money and the environment.