Owner's Manual

Advanced Settings
72
N300 Wireless Router JWNR2000v3
Advanced Wireless Settings
You can use this screen to turn the wireless radio on and off, to specify WPS settings, to use
AP mode, and to set up a wireless access list.
The Fragmentation Length, CTS/RTS Threshold, and Preamble Mode options in this screen
are reserved for wireless testing and advanced configuration only. Do not change these
settings unless you have a specific reason to do so.
Control the Wireless Radio
By default, the wireless radio is enabled so that you can connect wirelessly to the modem
router. You can turn the wireless radio on or off in the Advanced Wireless Settings screen.
When the wireless radio is off, you can still use an Ethernet cable for a LAN connection to the
modem router.
 To turn the wireless radio on or off:
1. Select ADV
ANCED > Advanced Setup > Advanced Wireless Settings.
The following screen displays:
By default, the Enable Wireless Router Radio check box is selected.
2. Select or clear the Enable W
ireless Router Radio check box.
If you clear this check box, this turns off the WiFi feature of the wireless modem router.
3. Click Apply.
Your changes take effect.