Owner's Manual

Supplemental Information
109
N300 Wireless Router JWNR2000v3
Technical Specifications
Table 4. JWNR2000v3 Router specifications
Feature Description
Data and routing protocols TCP/IP, RIP-1, RIP-2, DHCP, PPPoE, PPTP, Dynamic DNS, and UPnP.
Power adapter AC plug is
localized
• 110V–240V, 50/60 Hz, input
• All regions (output): 5 VDC @ 1A, output
Dimensions 173.2 x 135.8 x 34 mm (6.82 x 5.35 x 1.34 in.)
Weight 228.3 g (0.5 lb)
Operating temperature –5° to 45°C (23º to 113ºF)
Operating humidity 95% maximum relative humidity, noncondensing
Electromagnetic emissions China CCC & SRRC
LAN 10BASE-T or 100BASE-Tx, RJ-45
WAN 10BASE-T or 100BASE-Tx, RJ-45
Wireless Maximum wireless signal rate complies with the IEEE 802.11 standard. See the
footnote for the previous table.
Radio data rates Auto Rate Sensing
Data encoding standards IEEE 802.11b/g/n 2.4GHz
Maximum computers per
wireless network
Limited by the amount of wireless network traffic generated by each node
(typically 50–70 nodes).
Operating frequency range 2.412–2.462 GHz (US)
2.412–2.472 GHz (Europe ETSI)
802.11 security WPA-PSK, WPA2-PSK, and WPA/WPA2
Firewall Inbound (communications coming
in from the Internet)
Disabled (bars all unsolicited requests)
Outbound (communications going
out to the Internet)
Enabled (all)
1. Maximum wireless signal rate derived from IEEE Standard 802.11 specifications. Actual throughput can vary.
Network conditions and environmental factors, including volume of network traffic, building materials and
construction, and network overhead, lower actual data throughput rate.
Table 3. Factory default settings (continued)
Feature Default behavior