Owner's Manual

Supplemental Information
108
N300 Wireless Router JWNR2000v3
Factory Settings
You can return the router to its factory settings. Insert the end of a paper clip or a similar
object to press and hold the Reset button on the back of the router for at least seven
seconds. The router resets and returns to the factory configuration settings shown in the
following table.
Table 3. Factory default settings
Feature Default behavior
Router login User login URL www.routerlogin.com or www.routerlogin.net
User name (case-sensitive) admin
Login password (case-sensitive) password
Internet
connection
WAN MAC address Use default hardware address
WAN MTU size 1500
Port speed AutoSensing
Local network
(LAN)
LAN IP 192.168.1.1
Subnet mask 255.255.255.0
DHCP server Enabled
DHCP range 192.168.1.2 to 192.168.1.254
Time zone GMT
Time zone daylight saving time Disabled
Allow a registrar to configure this
router
Enabled
DMZ Disabled
Wireless Wireless communication Enabled
SSID name See router label
Security WPA2-PSK (AES)
Broadcast SSID Enabled
Transmission speed Auto
1
Country/region United States in the US; otherwise varies by region
RF channel 6 until region selected
Operating mode Up to 300 Mbps