Owner's Manual

N300 Wireless Router Model JWNR2000Tv3

5. Type the IP subnet mask for this destination.

If the destination is a single host, type 255

.255.255.255.

6. T

ype the gateway IP address.

The gateway IP address must be a router on the same LAN segment as the

JWNR2000Tv3 rou

ter.

7. T

ype a number from 1 through 15 as the metric value.

This value represents the number of routers be

tween your network and the destination.

Usually, a setting of 2 or 3 works, but if you have a direct connection, set it to 1.

8. Click App

ly to add the static route.

Remote Management

The remote management feature lets you upgrade or check the status of your

JWNR2000Tv3 router over the Internet.

 To set up remote management:

1. Select Adv

anced > Advanced Setup > Remote Management.

Note: Be sure to change the router’s default login password to a secure

password. The ideal password contains no dictionary words from any language

and contains uppercase and lowercase letters, numbers, and symbols. It can

be up to 30 characters.