Owner's Manual

N300 Wireless Router Model JWNR2000Tv3

Erase

You can erase the configuration and restore the factory default settings. If you move the

router to a different network or if you forget the password, you might want to restore factory

default settings.

You can use the Reset

button on the back of the router (see Factory Settings on page 97), or

you can click the Erase

button in this screen.

Erase sets the user name to admin, the password

to password, and the LAN IP address to

192.168.1.1, and enables the router’s DHCP.

Set Password

This feature allows you to change the default password that is used to log in to the router with

the user name admin.

This procedure is not the same as changing the password for wireless access. The label on

the bot

tom of your router shows your unique wireless network name (SSID) and password for

wireless access (see Label on p

age 7).

 To set the password for the user name admin:

1. Select Advance

d > Administration > Set Password to display the following screen:

2. Type the old password and type the new password twice in the fields on this screen.

3. Click Apply

so that your changes take effect.