Owner's Manual

52
N300 Wireless Router Model JWNR2000Tv3
3. Click Add to add a service.
The Block Services Setup screen displays:
4. From the Service Type drop-down menu, select the application or service to allow or block.
The menu already displays several common ser
vices, but you are not limited to these
choices. To add any additional services or applications that do not already appear, select
User Defined.
5. If
you know that the application uses either TCP or UDP, select the appropriate protocol.
If you are not sure, select Both.
6. Enter th
e starting and ending port numbers.
If the application uses a single port number, ent
er that number in both fields.
7. Select the rad
io button for the IP address configuration you want to block, and enter the IP
addresses.
You can block the specified service for a single computer, a range of computers with
con
secutive IP addresses, or all computers on your network.
8. Click Add to enable
your Block Services Setup selections.