Owner's Manual

47
N300 Wireless Router Model JWNR2000Tv3
Set Up QoS for a Router LAN Port
 To create a QoS policy for a device connected to one of the router’s LAN ports:
1. Select Adv
anced > Setup > QoS Setup to display the QoS Setup screen.
2. Select th
e Turn Internet Access QoS On check box and click Apply.
3. Click the Set
up QoS Rule button to see the existing priority rules.
4. Scroll down to the bot
tom of the screen and click the Add Priority Rule button.
The Qos - Priority Rules screen displays.
5. From the Priority Category
drop-down menu, select Ethernet LAN Port, as shown in the
following figure:
6. From the Ethernet LAN Port drop-down menu, select the LAN port.
7. From the
Priority drop-down menu, select the priority for Internet access for this port’s traffic
relative to other applications.
The options are Low, Normal, High, and Highest.
8. Click App
ly to save this rule to the QoS Policy table.
Set Up QoS for a MAC Address
 To create a QoS policy for traffic from a specific MAC address:
1. Select Adv
anced > Setup > QoS Setup to display the QoS Setup screen.
2. Select th
e Turn Internet Access QoS On check box and click Apply.
3. Click the Set
up QoS Rule button to see the existing priority rules.
4. Scroll down to the bot
tom of the screen and click the Add Priority Rule button.
The Qos - Priority Rules screen displays.