Owner's Manual

N300 Wireless Router Model JWNR2000Tv3

Guest Networks

Adding a guest network allows visitors at your home to use the Internet without giving them

your wireless security key. You can add a guest network to the 2.4 GHz b/g/n wireless

network.

 To set up a guest network:

1. F

rom the Basic Home screen, select Guest Network to display the following screen:

2. Select any of the following wireless settings:

• Enable Gues

t Network. When this check box is selected, the guest network is

enabled, and guests can connect to your network using the SSID of this profile.

• Enable SSID Broadca

st. If this check box is selected, the wireless access point

broadcasts its name (SSID) to all wireless stations. Stations with no SSID can adopt

the correct SSID for connections to this access point.

• Allow

Guest to access My Local Network. If this check box is selected, anyone

who connects to this SSID has access to your local network, not just Internet access.

• Enable W

ireless Isolation. If this check box is selected, wireless computers or

devices that join the network can use the Internet but cannot access each other or

access Ethernet devices on the network.

3. Give the

guest network a name.

The guest network name is case-sensitive and can be up to 32 characters. You then

manua

lly configure the wireless devices in your network to use the guest network name

in addition to the main nonguest SSID.

4. Select a securit

y option from the list.

The security options are described in Guest Network Wireless Security Options on

page 32.

5. Click App

ly to save your changes.