Owner's Manual

12
N300 Wireless Router Model JWNR2000Tv3
4. Locate the cable (A) that is still attached to your computer. Insert that cable into a yellow
LAN port on the router, as shown in the following figure:
A
Internet
Figure 6. Connect the Ethernet cable to a LAN port on the router
5. Connect any additional wired computers to your router by inserting an Ethernet cable from a
computer into one of the three remaining LAN ports.
6. S
tart your network in the correct sequence, as described in the following procedure.
CAUTION:
Failure to start or restart your network in the correct sequence could
prevent you from accessing the Internet.
 To start your network:
1. First, plu
g in and turn on the cable or DSL modem. Wait 2 minutes.