Owner's Manual

96 | Appendix A. Supplemental Information

N300 Wireless Gigabit Router JNR3000 User Manual

Factory Default Settings

Table 3. Router Default Settings

Feature Default Setting

Router Login URL http://www.routerlogin.net or http://www.routerlogin.com

WAN MAC address Default hardware address (on label)

MTU Size 1500

LAN IP address (gateway IP address) 192.168.1.1 (printed on product label)

Router subnet 255.255.255.0

DHCP server Enabled

DHCP range 192.168.1.2 to 192.168.1.254

Time zone GMT

Adjust for daylight saving time Disabled

Allow a registrar to configure this router Enabled

Wireless communication Enabled

Preset SSID NETGEARxx (where xx is two random numbers). The Preset SSID

is printed on the product label.

Security option passphrase Enabled. The security option passphrase consists of an adjective,

a noun, and three numbers. For example, luckyflower348. This

passphrase is printed on the product label.

Wireless access list (MAC Filtering) All wireless stations allowed

Broadcast SSID Enabled

Transmission speed Auto

*. Maximum wireless signal rate derived from IEEE Standard 802.11 specifications. Actual throughput will vary.

Network conditions and environmental factors, including volume of network traffic, building materials and

construction, and network overhead lower actual data throughput rate.

Country/Region United States in NA only, otherwise varies by country and region

RF channel auto until region selected

Operating mode 145 Mbps

Data rate Best

Output power Full

Inbound communication from the Internet Disabled (bars unsolicited requests except traffic on port 80, the

http port)

Outbound communication to the Internet Enabled (all)