Owner's Manual

Advanced Settings

N600 Wireless Dual Band Router JNDR3000

Note: If you are using the JNDR3000 base station with a non-NETGEAR

router as the repeater, you might need to change more configuration

settings. In particular, you should disable the DHCP server function

on the wireless repeater AP.

 To configure the router as a repeater unit:

1. Log in to the router that will be the repeater

2. Select BASIC > W

ireless Settings and verify that the wireless settings match the base unit

exactly.

The wireless security option has to be set to WEP or None.

3. Select ADV

ANCED > Wireless Repeating Function.

The Wireless Repeating Function screen displays.

4. Select the Enable Wireless Repeating Function check box for the frequency you want.

5. Select the W

ireless Repeater radio button.

6. Fill in the Repeater IP

Address field.

This IP address has to be in the same subnet as the base station, but different from the

LAN IP address of the base station.

7. (Optional) Select the Disable W

ireless Client Association check box to prevent wireless

clients from associating with the repeater and allowing LAN client associations only.