Owner's Manual

NETGEAR genie Basic Settings
26
N600 Wireless Dual Band Router JNDR3000
For information about the fields that appear on the screen, see Internet Setup If
Your ISP Does Not Require a Login on page 28.
3. Enter the settings for the IP address and DNS server.
The default settings usually work fine. If you have problems with your connection, check
the ISP settings.
4. Click the Apply button to save your settings.
5. Click the T
est button to test your Internet connection.
If the NETGEAR website does not display within 1 minute, see Chapter 9,
Troubleshooting.
The descriptions in the following sections explain all of the possible fields in the Internet
Setup screen.
The fields that display in this screen depend on whether an ISP login is
required.
Does Your ISP Require a Login? Select either Ye
s or No.
Internet Setup If Your ISP Requires a Login
If your ISP requires a login and you selected Yes, the following screen displays:
Figure 7. ISP requires a login screen
These fields display when your ISP requires a login: