Quick Reference Guide

Reference Manual for the Model HR314 802.11a Hi-Speed Wireless Router
Preparing Your Network 3-3
The Network window opens, which displays a list of installed components:
You must have an Ethernet adapter, the TCP/IP protocol, and Client for Microsoft Networks.
If you need the adapter:
a. Click the Add button.
b. Select Adapter, and then click Add.
c. Select the manufacturer and model of your Ethernet adapter, and then click OK.
If you need TCP/IP:
a. Click the Add button.
b. Select Protocol, and then click Add.
c. Select Microsoft.
d. Select TCP/IP, and then click OK.
If you need Client for Microsoft Networks:
Note: It is not necessary to remove any other network components shown in the Net-
work window in order to install the adapter, TCP/IP, or Client for Microsoft Networks.