Reference Manual

22
TCP/IP Setup
To set the TCP/IP settings, complete the following:
1. Choose the TCP/IP setup option from the HE102 Web Server home page.
2. Configure the TCP/IP parameters. When you are done, click Apply and
then the Reboot AP button for the changes to take effect.
CONFIGURATION DESCRIPTION
MAC Address Displays the MAC address of the access point.
IP Address
Specifies the IP address of the access point.
Default: 192.168.0.225
Subnet mask
Specifies the subnet mask of the access point.
Default: 255.255.255.0
Default gateway
Specifies the default gateway access point IP address.
Default: 0.0.0.0
DHCP Client
The access point will get the IP address, subnet mask and the default
gateway automatically from the DHCP server if the DHCP is enabled.
Default: Enable