Operation Manual

Settings

NeoTV Prime with Google TV GTV100

Network Settings

When you install the NeoTV Prime, the onscreen setup prompts you to specify your network

settings. You can use the Network screen to view these settings and to change them.

The following settings are available on the Network menu:

Ethernet. Shows

if the NeoTV Prime is connected to a network with an Ethernet cable.

Wi-Fi. Shows if the Neo

TV Prime has joined a network with a Wi-Fi connection.

Bluetooth settings. Customize

the Bluetooth settings. See Bluetooth Settings on page 28.

Status. Displa

ys the following:

• I

P address

• Eth

ernet MAC address

• W

i-Fi MAC address

• L

ocal network

• I

nternet

Wi-Fi Internet Connection

You can connect the NeoTV Prime to your Wi-Fi home network to access the Internet.

 To set up a Wi-Fi network connection.

1 On the

Settings menu, select Network > Wi-Fi.

2 Select Turn on Wi-Fi.

The check box is now selected to show that Wi-Fi is turned on, and the Wi-Fi networks in

your a

rea are displayed.

3 If you do not see your Wi-F

i network, select Add Wi-Fi network, and type in the network

name.

4 Select your

Wi-Fi network and type the password.

The IP setting is displayed. By default, the NeoTV Prime is se

t to get IP settings

dynamically, which works for most networks.

5 If you

want to use a static IP address (this is an advanced feature), select Static IP address

and type the IP address.