Leaflet

Version 1.0
➍ Power on the Switch (the output
shown in the picture should be now
visible in Hyper Terminal)
Password recovery
The following two items will be displayed:
1 – Start FSM73xxS Application
(depending on the switch model)
2 – Display Utility Menu
➎ Select 2 and press enter within 3
seconds from the options being
displayed. If no selection is made within 3
seconds reboot the switch.
After the choice at ➎ , a new Menu will
be displayed
➏ Choose option number 7 for Password
Recovery procedure
➍
➎
➏