User Manual

Configure System Information
95
M6100, M5300, and M7100 Series Managed Switches
5. Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
6. Click the Login button.
The web management interface menu displays.
7. Select System > Services > DHCP Server > DHCP Conflicts Information.
8. To display DHCP conflicts information, select one of the following radio buttons:
• All Address Conflicts. Specify all address conflicts to be deleted.
• Specific Address Conflict. Specify a specific dynamic binding to be deleted.
The following table describes the DHCP Conflicts Information fields.
Configure the DHCP Relay
 To configure DHCP relay:
1. Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
Table 35. DHCP Conflicts Information
Field Description
IP Address The IP address of the host as recorded on the DHCP server.
Hardware Address The client’s hardware address.
Detection Method The manner in which the IP address of the hosts were found on the
DHCP server.
Detection Time The time when the conflict was detected in N days NNh:NNm:NNs
format with respect to the system up time.