User Manual

Configure System Information
83
M6100, M5300, and M7100 Series Managed Switches
The web management interface menu displays.
7. Select System  Management  Green Ethernet  Green Ethernet LPI History.
8. Select the Interface.
9. In the Sampling Interval field, enter the interval at which EEE LPI data is collected.
This is a global setting and is applied to all interfaces. The range is 30 to 36000.The
default value is 3600.
10. In the Max Samples field, enter the maximum number of samples to keep.
This is a global setting and is applied to all interfaces. The range is 1 to 168.The default
value is 168.
11. Click the Apply button.
The update configuration is sent to the switch.
To refresh the screen, click the Update button.
The following table describes the nonconfigurable fields.
Table 30. Interface Green mode EEE LPI History
Field Description
Percentage LPI time per Chassis Time spent in LPI mode per chassis since EEE counters were last
cleared.
Sample No. Sample index.
Time Since The Sample Was
Recorded
Each time the screen is refreshed, it shows a different time as it reflects
the difference in current time and time at which the sample was
recorded.