User Manual

Configure System Information
76
M6100, M5300, and M7100 Series Managed Switches
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5. Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
6. Click the Login button.
The web management interface menu displays.
7. Select System > Management > Green Ethernet > Green Ethernet Interface
Configuration.
8. Specify the Go To Interface by entering the Interface in unit/slot/port format and click the Go
button.
The entry corresponding to the specified interface, is selected.
9. Select the Port.
10. Use the Auto Power Down mode selection to enable or disable this option.
The factory default is Enable. When the port link is down, the PHY automatically goes
down for a short period of time, and then wakes up to check link pulses. This allows the
switch to perform autonegotiation and save power consumption when no link partner is
present.
11. Use the EEE mode menu to Enable or Disable this option.
The factory default is Disable. IF the EEE mode is not supported, then N/A is displayed.
12. Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.