User Manual

Maintenance
740
M6100, M5300, and M7100 Series Managed Switches
8. From the Protocol menu, select the protocol used to store the core dump file.
Possible values are as follows:
• None. Disable core dump.
• TFTP. Set TFTP protocol.
• NFS. Set NFS protocol.
• USB. Set USB protocol.
9. In the File Path field, enter the path to the location to store the core dump file.
10. In the File Name field, enter the core dump file name.
11. Select the Hostname option to append the host name to the core dump file name.
12. Select the Time-stamp option to append a time-stamp to the core dump file name.
13. Select the Switch Register Dump option to dump the switch chip register in case of an
exception.
14. Select the Write Core Test option to test the core dump setup.
15. Select the Write Core option to create a core dump and store it to the previously configured
external server.
Executing this procedure causes a reload of the device.
16. Select the Save Current Settings option to save the current settings of the system.
17. Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.