User Manual

Monitor the System
711
M6100, M5300, and M7100 Series Managed Switches
10. Use Poller Interval to specify the maximum number of seconds between successive
samples of the counters associated with this data source.
A sampling interval of 0 disables counter sampling.
The Allowed range is 0 to 86400 seconds.
11. Use Sampler Receiver Index to specify the sFlow receiver for this flow sampler.
If set to 0, the sampler configuration is set to default and the sampler is deleted.
Only active receivers can be set. If a receiver expires, then all samplers associated with
the receiver also expires. The allowed range is 1 to 8.
12. Use Sampling Rate to specify the statistical sampling rate for packet sampling from this
source.
A sampling rate of 1 counts all packets. A sampling rate of 0 disables sampling. The
Allowed range is 1024 to 65536.
13. Use Maximum Header Size to specify the maximum number of bytes to be copied from a
sampled packet.
The allowed range is 20 to 256.