User Manual

Monitor the System
709
M6100, M5300, and M7100 Series Managed Switches
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
6. Click the Login button.
The web management interface menu displays.
7. Select Monitoring> sFlow > Advanced > sFlow Receiver Configuration.
8. Specify the Receiver Owner
This is the entity making use of this sFlowRcvrTable entry. The empty string indicates that
the entry is currently unclaimed and the receiver configuration is reset to default values.
An entity wishing to claim an sFlowRcvrTable entry must ensure that the entry is
unclaimed before trying to claim it. The entry is claimed by setting the owner string. The
entry must be claimed before any changes can be made to other sampler objects.
9. Receiver Timeout - The time (in seconds) remaining before the sampler is released and
stops sampling.
A management entity wanting to maintain control of the sampler is responsible for setting
a new value before the old one expires. The valid range is 0 to 2147483647. A value of
zero sets the selected receiver configuration to its default values.
10. Use No Timeout to select True or False to set the no time-out sampling for the receiver.
Sampling is not stopped until the No Timeout selected entry is True. The default value is
False.
11. Maximum Datagram Size - The maximum number of data bytes that can be sent in a
single sample datagram.
Set this value to avoid fragmentation of the sFlow datagrams. Default Value: 1400. The
allowed range is 200 to 9116.
12. Receiver Address. The IP address of the sFlow collector.
If set to 0.0.0.0, no sFlow datagrams are sent.
13. Receiver Port. The destination port for sFlow datagrams.
The allowed range is 1 to 65535.
The Receiver Datagram Version field displays the version of sFlow datagrams to be sent.