User Manual

Monitor the System
694
M6100, M5300, and M7100 Series Managed Switches
The default port is 514.
14. Select the severity option in the Severity Filter list.
A log records messages equal to or above a configured severity threshold. These
severity levels are available:
• Emergency (0). The system is unusable
• Alert (1). Action must be taken immediately
• Critical (2). Critical conditions
• Error (3). Error conditions
• Warning (4). Warning conditions
• Notice (5). Normal but significant conditions
• Informational (6). Informational messages
• Debug (7). Debug-level messages
The following table describes the nonconfigurable data.
View the Trap Logs
You can view the entries in the trap log. The information can be retrieved as a file.
 View the trap logs:
1. Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2. Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3. Launch a web browser.
4. Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5. Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
Table 242. Syslog Configuration
Field Description
Messages Received The number of messages received by the log process. This includes
messages that are dropped or ignored.
Messages Relayed The count of syslog messages relayed.
Messages Ignored The count of syslog messages ignored.