User Manual

Manage Device Security
675
M6100, M5300, and M7100 Series Managed Switches
Valid ACL Types include IP ACL, MAC ACL, and IPv6 ACL.
9. Use ACL ID to display all the ACLs configured, depending on the ACL type selected.
10. Click the Add button to add a VLAN ID to the selected ACL ID.
11. To delete a VLAN ACL-to-interface binding, select the check box for the interface and click
the Delete button.
The following table describes the information displayed in the ACL VLAN Binding Table.
Table 237. ACL VLAN Binding Table
Field Description
Direction The packet filtering direction for ACL.
VLAN ID The VLAN ID for ACL mapping.
Sequence Number An optional sequence number can be specified to indicate the order of
this access list relative to other access lists already assigned to this
VLAN and direction. A lower number indicates higher precedence
order. If a sequence number is already in use for this VLAN and
direction, the specified access list replaces the currently attached
access list using that sequence number. If the sequence number is not
specified by the user (the value is 0), a sequence number that is one
greater than the highest sequence number currently in use for this
VLAN and direction is used. The valid range is 1 to 4294967295.