User Manual

Table Of Contents

Configure System Information

M6100, M5300, and M7100 Series Managed Switches

The fields in the following table are visible only when DayLight Saving is Non Recurring.

View the DayLight Saving Time Status

 To view the DayLight Saving Time status:

1. Prepare your computer with a static IP address in the 169.254.100.0 subnet, for

example, 169.254.100.201.

2. Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on

the switch.

3. Launch a web browser.

4. Enter the IP address of the switch in the web browser address field.

Ends At These fields are used to configure the end values of date and time.

• Week. Configure the end week.

• Day. Configure the end day.

• Month. Configure the end month.

• Hours. Configure the end hours.

• Minutes. Configure the end minutes.

Offset Configure recurring offset in minutes. The valid range is 1–1440

minutes.

Zone Configure the time zone.

Table 22. DayLight Saving - Non Recurring

Field Description

Begins At These fields are used to configure the start values of the date and time.

• Week. Configure the start week.

• Day. Configure the start day.

• Month. Configure the start month.

• Hours. Configure the start hours.

• Minutes. Configure the start minutes.