User Manual

Manage Device Security
657
M6100, M5300, and M7100 Series Managed Switches
3. Launch a web browser.
4. Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5. Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
6. Click the Login button.
The web management interface menu displays.
7. Select Security > ACL > Advanced > IP ACL.
The IP ACL screen shows the current size of the ACL table and the maximum size of the
ACL table. The current size is equal to the number of configured IPv4 and IPv6 ACLs plus
the number of configured MAC ACLs. The maximum size is 100.
The Current Number of ACL field displays the current number of the all ACLs
configured on the switch.
The Maximum ACL displays the maximum number of IP ACL can be configured on the
switch, depending on the hardware.
8. In the IP ACL field, specify the ACL ID or IP ACL name, which depends on the IP ACL type.
The IP ACL ID is an integer in the following range:
• 1–99: Creates an IP basic ACL, which allows you to permit or deny traffic from a
source IP address.
• 100–199: Creates an IP extended ACL, which allows you to permit or deny specific
types of Layer 3 or Layer 4 traffic from a source IP address to a destination IP
address. This type of ACL provides more granularity and filtering capabilities than the
standard IP ACL.
• IP ACL Name: Create an IPv4 ACL name string that includes up to 31 alphanumeric
characters in length. The name must start with an alphabetic character.
Each configured ACL displays the following information: