User Manual

Manage Device Security
646
M6100, M5300, and M7100 Series Managed Switches
 To use the ACL Wizard to create a simple ACL:
1. Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2. Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3. Launch a web browser.
4. Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5. Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
6. Click the Login button.
The web management interface menu displays.
7. Select Security > ACL > ACL Wizard.
Note: The steps in this procedure describe creating an ACL based on the
destination MAC address. If you select a different ACL type, for
example, ACL based on a source IPv4, then what is shown on this
screen varies, depending on the current step in the rule configuration
process.
8. Use ACL Type to specify the ACL type you are using to create the ACL.
You can select one type from 10 optional types: