User Manual

Manage Device Security
599
M6100, M5300, and M7100 Series Managed Switches
3. Launch a web browser.
4. Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5. Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
6. Click the Login button.
The web management interface menu displays.
7. Select Security > Traffic Control > Port Security > Interface Configuration.
8. Select the check box next to the port or LAG to configure.
Select multiple check boxes to apply the same setting to all selected interfaces. Select
the check box in the heading row to apply the same settings to all interfaces.
9. Specify the following settings:
• Security Mode. Enables or disables the port security feature for the selected
interface.
• Max Allowed Dynamically Learned MAC. Sets the maximum number of dynamically
learned MAC addresses on the selected interface.
• Max Allowed Statically Locked MAC. Sets the maximum number of statically locked
MAC addresses on the selected interface.
• Violation Traps. Enables or disables the sending of new violation traps designating
when a packet with a disallowed MAC address is received on a locked port.