User Manual

Manage Device Security
595
M6100, M5300, and M7100 Series Managed Switches
6. Click the Login button.
The web management interface menu displays.
7. Select Security > Traffic Control > MAC Filter.
This is the list of MAC address and VLAN ID pairings for all configured filters.
8. To change the port masks for an existing filter, select the entry.
9. To add a new filter, select Create Filter from the MAC Filter list.
10. From the VLAN ID list, select the VLAN to use with the MAC address to fully identify packets
to be filtered.
You can change this field only when Create Filter is selected from the MAC Filter list.
11. In the MAC Address field, specify the MAC address of the filter in the format
00:01:1A:B2:53:4D.
You can change this field when you select the Create Filter option.
You cannot define filters for the following MAC addresses:
• 00:00:00:00:00:00
• 01:80:C2:00:00:00 to 01:80:C2:00:00:0F
• 01:80:C2:00:00:20 to 01:80:C2:00:00:21
• FF:FF:FF:FF:FF:FF
12. Use Source Port Members to list the ports to be included in the inbound filter.
If a packet with the MAC address and VLAN ID you selected is received on a port that is
not in the list, it is dropped.
13. Use Destination Port Members to list the ports to be included in the outbound filter.