User Manual

Manage Device Security
565
M6100, M5300, and M7100 Series Managed Switches
6. Click the Login button.
The web management interface menu displays.
7. Select Security > Access > HTTPS > HTTPS Configuration.
8. Select the HTTPS Admin Mode Disable or Enable radio button.
This enables or disables the administrative mode of Secure HTTPS. The currently
configured value is displayed. The default value is Disable. You can download SSL
certificates only when the HTTPS admin mode is disabled. HTTPS admin mode can be
enabled only if a certificate is present on the device.
9. Select the SSL Version 3 Disable or Enable radio button.
This enables or disables Secure Sockets Layer version 3.0. The currently configured
value is displayed. The default value is Enable.
10. Select the TLS Version 1 Disable or Enable radio button
This enables or disables Transport Layer Security version 1.0. The currently configured
value is displayed. The default value is Enable.
11. In the HTTPS Port field, type the HTTPS port number.
The value must be in the range of 1025 to 65535. Port 443 is the default value. The
currently configured value is displayed.
12. In the HTTPS Session Soft Timeout (Minutes) field, enter the inactivity time-out for HTTPS
sessions.
The value must be in the range of 1 to 60 minutes. The default value is 5 minutes. The
currently configured value is displayed.
13. In the HTTPS Session Hard Timeout (Hours) field, set the hard time-out for HTTPS
sessions.
This time-out is unaffected by the activity level of the session. The value must be in the
range of 1 to 168 hours. The default value is 24 hours. The currently configured value is
displayed.