User Manual

Manage Device Security
551
M6100, M5300, and M7100 Series Managed Switches
4. Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5. Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
6. Click the Login button.
The web management interface menu displays.
7. Select Security > Management Security > RADIUS > Accounting Server Configuration.
8. In the Accounting Server IP Address field, specify the IP address of the RADIUS
accounting server.
9. In the Accounting Server Name field, enter the name of the accounting server.
10. In the Port field, specify the UDP port number the server uses to verify the RADIUS
accounting server.
The valid range is 0–65535. If the user has read-only access, the value is displayed but
cannot be changed.
11. From the Secret Configured list, select Yes to add a RADIUS secret in the next field.
After you add the RADIUS accounting server, this field indicates whether the shared
secret for this server is configured.
12. In the Secret field, type the shared secret to use with the specified accounting server.
13. From the Accounting Mode list, enable or disable the RADIUS accounting mode.
14. To delete a configured RADIUS accounting server, click the Delete button.
To clear the accounting server statistics, click the Clear Counters button.
The following table describes RADIUS accounting server statistics available on the screen.